■Enclosure metal cabinet, Analog Rytm produces eight independent voices that can be used to give sound to as many percussive timbres generated with different synthesis modes; all this can be organized into a rhythmic pattern through the 12 pads, sensitive to dynamics and pressure, or with the usual row of 16 Trig Buttons. 

■Classic headphone output and the pair of Main Out Left / Right, there are four other standard ¼ "TRS sockets that each support two individual signals. The first TRS output supports BD and BT (kick and tom), the second SD and LT (snare and bass tom), the other two each support two tone pairs : CH / OH (closed and open hat)along witg with MT / HT (medium and high tom); CY / CB (cymbal and cowbell) shared with RS / CP (rim shot and handclap). 

■The Sequencer
12 drum tracks
1 FX track
Up to 64 steps per pattern
Individual track lengths
Trig mute, accent, swing, slide functions
Micro timing
Parameter locks
Chromatic mode
Scene mode
Performance mode
Sound-per-step change
Assignable Retrig
Instant Pattern, Kit and Sound reload
Full real-time control

■Storage
128 Projects (+Drive)
128 Kits per Project
128 Patterns per Project
16 Songs per Project
4096 Sounds (+Drive Sound Library)
128 Sounds per Project
128 samples per Project
1 GB +Drive sample storage
128 factory samples

■Send Effects
Delay
Reverb

■Master Effects
Analog stereo distortion
Analog stereo compressor

■Drum voice features (×8)
Fully analog signal path
1× specialized analog percussion sound generator
1× sample playback engine
1× analog overdrive circuit
1× 2-pole analog multi-mode filter
1× panning VCA pair
1× filter envelope
1× amp envelope
2× individual effect sends
1× assignable LFO
1× dedicated LFO fade envelope

■Hardware
12 velocity, pressure sensitive, and backlit pads
122×32 pixel backlit LCD
MIDI In/Out/Thru with DIN Sync Out
2 × 1/4″ impedance balanced main out jacks
4 × 1/4″ dual mono separate voice out jacks
1 × 1/4″ audio in stereo jack
1 × 1/4″ stereo headphone jack
48 kHz, 24-bit D/A and A/D converters
Flash-EEPROM upgradable OS
USB 2.0 port

■Balanced Audio Outputs
Headphones out level: +15 dBu (55 ?)
Main outputs level: +15 dBu
Output impedance: 440 – unbalanced
Unbalanced Audio Inputs
Input level: +15 dBu maximum
Audio input impedance: 9 k ?

 ■Individual Voice Mono Outputs
Output level: +15 dBu
Output impedance: 440 ? unbalanced

■Electrical Specifications
Unit power consumption: 14 W typical, 20 W maximum.
power supply: 12 V DC, >2 A
Physical Specifications steel chassis

■Dimensions: W340×D176×H63mm (13.4×6.9×2.4?) (including power switch, knobs and rubber feet)
Weight: approximately 2.4 kg (5.3 lbs) 

■ NO MANUAL
■ NO SERVICE MANUAL