Trend price : 70€
Stereo reverb and delay from famous BOSS half rack series budget line.
Company: Boss
Model: RRV-10
Class: digital effect
Weight: 0,9 kg
Dimensions: 218 (w) x 169 (h) x 44 (d) mm
Dates: 1987
Price: 70€
Resolution: 12 bits
Sampling Rate: 31,5kHz
Algorithms: 9 models
Pre-EQ: yes
Memory: none
Demo: 1
Video: 1
Review 1
DOWNLOAD: user manual
Overview
MINIRACK half-rack module features 4 knobs for edit and a rotative selectors for selection.
Back panel terminal connectors:
- stereo output
- stereo/mono input with guitar / line switch
- bypass pedalswitch input
Sound
digital reverb unit based on DSP BOSS technology sampling signal is 31.25 kHz at 12 bits resolution.
Effect algorithms
system offers 9 different models of echo-ambient environments. All parameters are easily accessible using frontal knobs for immediate effects change on decay time, gate time and pre- signal EQ.
ALGORITHMS LIST: room
(x2), hall (x2). plate (x2), multitap delay, multitap delay reverse and gated reverb.
TIP: special BOSS cancelling system allows to turn the unit off without killing reverb sounds.
Edit interface and functions
no display but edit is straightforward with simple knobs that change some algorithm characteristics.
- Decay/gate Time Knob set the decay of the reverberation (or the gate time of the gated reverberation). Rotating the knob clockwise makes longer time.
- Pre-equalizer Knob is a tone filter which adjusts the desired tone: clockwise cuts the lowerfrequency and counterclockwise cuts the higher frequencies. The pre-equalizer section can widely control the lone of the reverb sounds
- effect Level Knob adjusts the volume of the effect sound (aka WET).
- Direct Level Knob adjust the volume of the direct (aka DRY) sound.
Technical data
Input Level/Input impedance: -20dBm/1MOhm, -10dBm/47kOhm
Output Level/Output Impedance: -20dBm/2kOhm, - 10dBm/2kOhm
Output Load Impedance: Over 10k Ohm
Frequency response: from 10Hz to 30kHz +1/-3dB (dry), 30Hz to 10kHz +1/-3 dB
Sampling Rate: 31.5kHz
A/D D/A Conversion: 12-bit converter with analog compression.
Residual Noise: -100dBm or less (IHF-A. Level switch at -20dBm)
Controls: Decay-Gate Time, Pre-Equalizer, Effect Level, Direct Level
Review
OK: low-fi sound / cheap
NOT : obsolete
"Cheap good old reverb/delay. No sub menus: all under the knobs power! if you're into low-fidelity machine."
Text , review, special demos copyright polynominal.com / Eric Pochesci